Available Models :
| Blood Bank Refrigerator | Cooling Incubator | Plasma freezers | Platelet Agitator | Bacteriological Incubator | Blood Bag Tube Sealer | Blood donor Couch | Bio Safety Cabinet | Laboratory Centrifuge LLC 5
Blood Bank Refrigerator
- Name of Equipment LABTOP® Micro Controller Based Blood Bank Refrigerator
- Control System Micro controller based temperature indicator cum controller with Digital Display and PT 100 sensor
- Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
- Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant
- Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
- Insulation 3” Thick CFC free PUF Insulation.
- Lighting Interior illumination for working area.
- Observation Door Inside see through unbreakable acrylic door
- Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose
- Trays Specially designed Stainless Steel Baskets.
- Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
- Power Works on 230 V AC single phase 50Hz.
- Other Castor wheels, MCB. Heavy duty latch with lock & key
- Safety feature 180Sec. compressor ‘ON’ delay timer to safe guard the compressor. Password protected keypad lock
- Documentation Calibration certificate with Supporting Document of ERTL ( Govt. of India)
- Certification IS0-9001:2008, ISO-13485: 2012 and CE
- Silent Features 1. Audio visual alarm- temperature high/low sensor open/short door open compressor on ( visual), 2. 6-8 hours battery backup for alarm system, temperature display and chart recorder, 3. Frost free refrigeration system, 4. Suitable voltage stabilizer, 5. Temperature controller with LCD display with 24 hours data monitoring
Cooling Incubator
- Name of Equipment LABTOP® Micro Controller Based Cooling (BOD) Incubator
- Control System Micro controller based temperature indicator cum Controller with digital display and PT 100 sensor
- Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
- Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant
- Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
- Heating System U shaped S.S. Nichrome wire air heaters
- Insulation 3” Thick CFC free PUF Insulation.
- Lighting Interior illumination for working area.
- Observation Door Inside see through unbreakable acrylic door
- Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose
- Trays Stainless Steel perforated trays.
- Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
- Power Works on 230 V AC single phase 50Hz.
- Safety feature 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature., 2. Password protected keypad, 3. 180 seconds time delay for compressor
- Certification ISO 9001: 2008 , ISO 13485:2012
- Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports
Plasma freezers
- Name of the Equipment LABTOP® Micro Controller based Vertical Plasma Freezer
- Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
- Temperature Recorder 7 Days Circular Chart Temperature Recorder
- Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
- Refrigeration System Hermetically Sealed CFC Free Emerson compressor
- Trays Specially designed Stainless Steel Plasma basket.
- Insulation 3” Thick CFC free PUF Insulation.
- Sub door Insulated Stainless steel
- Other Castor wheels, MCB, Heavy duty latch with lock & key
- Power Works on 230 V AC single phase 50Hz.
- Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor., 2. Password protected keypad lock
- Certifications ISO 9001: 2008 , ISO 13485:2012
- Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports
Platelet Agitator
- Name of Equipment LABTOP® Micro Controller Based platelet Agitator
- Control System Micro controller based indicator cum controller with digital display.
- Motion failure Alarm Audio Visual Alarm if the speed deviates from the preset speed
- Display LED display of RPM
- RPM 70 ±5
- Power Works on 230 V AC single phase 50Hz.
- Drawers Pull out Removable
- Agitator Mechanism Smooth movement with ball bearings
- Movement To and fro
- MOC Mild steel powder coated
- Documentation LABTOP will provide IO,OQ,PQ documents with Material Test Certificates and Calibration reports
Bacteriological Incubator
- Name of Equipment LABTOP® Micro Controller Based Bacteriological Incubator
- Control System Micro controller based temperature indicator cum controller with Digital display and PT 100 sensor.
- Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
- Heating System U shaped S.S. Nichrome wire air heaters
- Air Circulation Motor and blower arrangement to have uniformity of Temperature under Loaded condition.
- Insulation 3” Thick CFC free PUF Insulation.
- Lighting Interior illumination for working area.
- Observation Door Inside see through unbreakable acrylic door
- Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation purpose.
- Trays Stainless Steel perforated trays.
- Other Castor wheels, MCB, Adjustable Tray Height arrangements. Heavy duty latch with lock & key
- Power Works on 230 V AC single phase 50Hz.
- Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
- Certification ISO 9001: 2008 , ISO 13485 : 2012
- Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports
Blood Bag Tube Sealer
- Name of Equipment LABTOP® Micro Controller Based Blood Bag Tube Sealer
- Control System Micro controller based controller.
- MOC Mild steel powder coated
- Sealing Time 1.4 Seconds
- Oscillation Frequency 40.68
- Radio frequency output 15 W
- Input Voltage 230 V Works on 90- 230 V AC single Phase
- Frequency 50Hz
- Power consumption 80 VA
- Certifications ISO 9001: 2008 and ISO 13485 : 2012
- Documentations LABTOP will provide user manual and Calibration reports
Blood donor Couch
- Name of Equipment LABTOP® Micro Controller Based Blood Donor Couch
- Control System Micro controller based controller with remote.
- Material Of construction Mild steel fabricated body duly powder coated
- Movement By actuator
- Power supply 230 V AC
- Power consumption 100 / 150 W
- Length of the seat 210 cm
- Width of the seat 67 cm
- Dept of the seat 60 cm
- Width of the arm rest 15 cm
- Thickness of upholstery 10 cm
- Interface To LABTOP blood collection monitor.
- Trays Mild steel powder coated.
- Movement 4 numbers castor wheels with locking
- Power Works on 230 V AC single phase 50Hz.
- Other features 1. Facility for blood collection from both sides, 2. Based on homodynamic principles, 3. Tilt and height adjustments can be done by using remote control.
- Certifications ISO 9001: 2008 and ISO 13485
- Documentations Labtop will provide user manual with test reports
Bio Safety Cabinet
- Name of Equipment LABTOP® Bio Safety Cabinet
- Type CLASS II A2
- Main Body Mild steel powder coated or stainless steel
- Work Zone Completely in joint less Stainless Steel (304).
- Type of Filter HEPA filters
- Efficiency 99.999%
- Particle retention 0.3 micron
- Blower-motor assembly Dynamically balanced
- Static pressure measurement Magnahelic gauge
- Inflow velocity 0.53 m/s
- Down flow Velocity. 0.33 m/s
- Illumination of work surface Fluorescent tube light.
- Ultra violet tube light 1 no,3 feet, 30 Watt - PHILIPS - HOLLAND make
- Cleanliness. Class 100
- Noise level 65 decibel
- Air flow system 70 % of recirculation and 30% exhaust
- Front Sash Door Motorised shattered proof Glass door
- Safe opening 200 mm
- Maximum opening 400 mm
- Height of the stand 650 mm
- Other Castor wheels, MCB
- Power Works on 230 V AC single phase 50Hz.
- Certification ISO 9001: 2008 , ISO 13485 : 2012 and CE
- Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports
Laboratory Centrifuge LLC 5
- Name of Equipment LABTOP® Micro Controller Based Laboratory Centrifuge
- Control System Micro controller based with Graphic Display
- Centrifuge Motor Brushless Induction motor
- Display Set values and process values
- Door lock Automatic motorized door lock
- Material of constructions Mild steel powder coated
- Front panel ABS molded
- Power Works on 230 V AC single 60/50Hz.
- Maximum RPM 5000
- Maximum RCF 4745 x g
- Timer 0-99 minutes
- Noise 65 dB
- Weight 30 KG
- 440 x 550 x 330 mm (L x W x H)
- Certifications ISO 9001: 2008 , ISO 13485 : 2012
- Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports
Enquire About this Product
