Patient Warmer

Available Models : | HOTLINE® 3 Blood and Fluid Warmer | Level 1® Convective Warmer | HOTLINE® Blood and Fluid Warmer | HOTLINE® Disposable Administration Sets

HOTLINE® 3 Blood and Fluid Warmer

The HOTLINE® Fluid Warmers at your hospitals can be converted to the latest technology - the HOTLINE® 3. This conversion is designed to make the existing system:

  • Easier to use
  • Easier to transport
  • Easier to maintain

What changes are required?
Hardware: The mounting block on the Warmer (HL-90), where the disposable set connects to the hardware, has been replaced with a new mounting block. The converted HOTLINE® Fluid Warmer will be referred to as the HL-390. (Kindly update your device records to reflect the change from item number HL-90 to HL-390).

Disposable: A new and improved disposable set (L-370) now replaces the existing L-70 disposable set. The enhanced HOTLINE® Fluid Warming System will require you to use the new dedicated disposable set, the L-370.
Benefits of the conversion In addition to the benefits of HOTLINE®, you now get the following new benefits due to the conversion to the HOTLINE® 3 Fluid Warming System:

  • Reduces monthly maintenance requirements*: O-ring lubrication is performed every 12 months rather than every 30 days, a significant time saver for hospital biomedical.
  • Improves portability by keeping recirculating solution in the tubing/system: When the new disposable set is removed from the new mounting block, valves built into the connector close, trapping the recirculating solution in the tube. The patient line can now be transferred with the patient from the surgery room to recovery to be connected into a different HL-390 warmer, if required.
  • Allows for easier set up and disconnect of disposable: The newly designed disposable connector locks into the new mounting block with an audible click and holds the patient line firmly in place until it’s unlocked to transfer it to another HL-390 warmer or to discontinue use.

* When using the Hydrogen Peroxide recirculating solution protocol Frequently Asked Questions

  • Will the priming volume for the converted HOTLINE® be different from the existing device? No, the priming volume is still the same that you are accustomed to with the existing HL-90 and L-70
  • Is the length of the new disposable set (L-370) different from the existing L-70? No, both the L-370 and the L-70 are 2.4 m (8 ft) long.
  • Will we be able to infuse fluids at the same temperature & flow rates as before? Yes, the system is capable of delivering normothermic fluids at the same flow rates as you are accustomed to.
  • Do we still need to replace the o-rings every 12 months? No, with this new technology, o-ring wear and tear is almost eliminated and you do not need to replace these any longer. The o-ring only needs to be lubricated once every 12 months.
  • We have some left over L-70 disposable sets that were not replaced by the Smiths Medical representatives who performed the conversion. What should we do with these disposables?
  • Smiths Medical representatives did not convert some of the existing devices (HL-90) at our hospitals, but instead labeled them with a red sticker. Can we use these? No, these devices are either out-of-service or defective and are meant to be returned to BD Equipments. Please call the number on the sticker to get instructions to return these devices.

Level 1® Convective Warmer

The Level 1® convective warming system consists of a high-flow convective warmer with hose-end temperature control, a convective warming blanket, and accessories.

The convective warmer draws ambient-temperature air through a HEPA air filter. The filtered air is warmed to a selected temperature.

The warmed air enters the convective warming blanket through the hose and is distributed through delivery channels. Perforations on the patient side of the blanket gently disperse warm air over the patient.

The safety circuit provides an independent means to discontinue power to the heater. This design prevents exposing the patient to excessive temperatures, while continuously monitoring over and under temperature alarms for each setting.

Order Code    Description    Unit Per Case

  • L1-CW-120V    110-127V, 50/60 Hz    1
  • L1-Hose        Replacement L1-CW Hose    1
  • L1-Cart    Cart/Trolley    1
  • L1-Shelf    Cart/Trolley Storage Shelf    1
  • L1-Filter    Replacement L1-CW Filter    10
  • L1-Clamp    IV Pole Clamp    1

Order Code    Description    Unit Per Case

  • L1-PWR-ARG    Argentina    1
  • L1-PWR-B    Americas    1
  • L1-PWR-BR1    Brazil        1
  • L1-PWR-I-China    China and Mongolia    1
  • L1-PWR-H    Israel        1
  • L1-PWR-I    ANZ        1
  • L1-PWR-J    Switzerland    1
  • L1-PWR-JP    Japan        1
  • L1-PWR-K    Denmark and Bangladesh    1
  • L1-PWR-KOR    South Korea    1
  • L1-PWR-L    Chile and Italy    1
  • L1-PWR-M    India, Pakistan, Sri Lanka    1
  • L1-PWR-THA    Thailand    1
  • L1-PWR-ZAF    South Africa    1
  • L1-PWR-EU    CE 7/7 style, includes multi-lingual printed manual    1
  • L1-PWR-G    UK style, includes English printed manual    1
  • SC-5000    Replacement sheet clip    1
  • CW-5000    Replacement cord wrap    1

HOTLINE® Blood and Fluid Warmer

HOTLINE® Blood and Fluid Warmers deliver normothermic fluid at routine flow rates. The unique triple-lumen tubing design eliminates patient line cool down and delivers warm fluids to your patients. Disposable set up is easy and fast, and requires less priming volume than other routine flow fluid warmers.
Product Benefits

  • Keeps blood and fluids warm, between 37 - 42°C, delivering warm fluids to the patient at flow rates up to 5000 ml/hr
  • Outperforms hotplate technologies in 91% of surgical procedures
  • Easy to use: less time to set up and easy to disconnect from the patient
  • Once-a-year reservoir maintenance protocol compared to hotplate warmers, which may require maintenance up to 12 times per year, means lower maintenance costs

  • HL-90    HOTLINE® Blood and Fluid Warmer, English, 115 Volt
  • HL-90-38    HOTLINE® Blood and Fluid Warmer, 38°C Setpoint English, 115 Volt
  • HL-90-40    HOTLINE® Blood and Fluid Warmer, 40°C Setpoint English, 115 Volt
  • HL-90-DA-230    HOTLINE® Blood and Fluid Warmer, Danish, 230 Volt
  • HL-90-DE-230    HOTLINE® Blood and Fluid Warmer, German, 230 Volt
  • HL-90-EL-230    HOTLINE® Blood and Fluid Warmer, Greek, 230 Volt
  • HL-90-FI-230    HOTLINE® Blood and Fluid Warmer, Finnish, 230 Volt
  • HL-90-FR-230    HOTLINE® Blood and Fluid Warmer, French, 230 Volt
  • HL-90-IT-230    HOTLINE® Blood and Fluid Warmer, Italian, 230 Volt
  • HL-90-JP-100    HOTLINE® Blood and Fluid Warmer, Japanese, 100 Volt
  • HL-90-NL-230    HOTLINE® Blood and Fluid Warmer, Dutch, 230 Volt
  • HL-90-NO-230    HOTLINE® Blood and Fluid Warmer, Norwegian, 230 Volt
  • HL-90-PORT-115    HOTLINE® Blood and Fluid Warmer, Portuguese, 115 Volt
  • HL-90-PORT-230    HOTLINE® Blood and Fluid Warmer, Portuguese, 230 Volt
  • HL-90-SP-115    HOTLINE® Blood and Fluid Warmer, Spanish, 115 Volt
  • HL-90-SP-230    HOTLINE® Blood and Fluid Warmer, Spanish, 230 Volt
  • HL-90-SV-230    HOTLINE® Blood and Fluid Warmer, Swedish, 230 Volt
  • HL-90-UK-230    HOTLINE® Blood and Fluid Warmer, English, 230 Volt

HOTLINE® Disposable Administration Sets

  • L-70    Blood and I.V. Fluid Warming Set with Injection Port (LATEX FREE)
  • L-70NI    Blood and I.V. Fluid Warming Set without Injection Port (LATEX FREE)
  • L-80    Blood and I.V. Fluid Warming Set with Injection Port and Gas Vent (NOT LATEX FREE)

Enquire About this Product

yC66